When rigging use safety cords able to resist ten times the weight of the laser projector.
Rig the laser projector at least 50 cm away from any wall or flammable objects.
Do not cover the laser projector and place it away from heat sources like spotlights to ensure a
good air flow around the product.
At least laser beams should not hit anything under 3 meters from the floor level. Be attentive to
reflective surfaces.
The laser projector has to be easily stopped if necessary, ensure the power cord or circuit breaker
is accessible at anytime during the laser show. Do not use dimmers or electronic switch to power .
Refer to local laws for further instructions when operating the laser projector.
Warning : ! All connections have to be made with the laser projector switched off !
5.Operation :
Internal laser service menu:
To navigate inside the service menu use « Enter » and « Return » switches
then + and – switches to change the value.
MODE:
SINGLE
Mode selection:
- DMX : DMX Mode / slave
- Single : Single logo selection
- Auto : Auto Mode / Sound to music Mode / Master
DMX adr:
1
Selection of DMX Address (for DMX mode) :
- from 1 to 512
TimeAuto
10 Sec
Selection of transitional time between scenes when operating in
automatic mode
LogoRun
1
Selection of the logo in Single mode :
- from 1 to 255
Zoom :
125
General Zoom :
- from 50 to 128
Auto :
Prog 1
Selection of the internal program for Auto mode :
Prog 1/2/3
Sound :
On
Activation of Sound to music Mode in Auto mode :
- On or Off
MicroS :
58
Sound detection sensibility level :
- from 0 to 60 (0 low sensitivity ,60 very high sensitivity)
InvX :
Off
Reverse Pan X :
- on or off
InvY :
Off
Reverse Tilt Y :
- on or off
3
