1.Warranty:
Electroconcept products are guaranteed 2 years (electronic , lasers sources, galvas).
Are excluded from warranty : Damages through inappropriate use , inappropriate storage
(humidity and/or thermal conditions,...) and lack of maintenance ( seized fan and motors, ...)
This product is not intended for continuous use, in order to extend the lifetime of laser sources
please make a 10 minutes break per hour of continuous operation (BLACKOUT OR
ELECTRICAL STOP)
2.Technical Datas :
Power supply
：
AC230V ±10
％
50Hz
～
60Hz
Power consumption
：
max 40W
Laser power specification : RGB1000mW ( ~300mW Red ,~150mW Green, ~600mW
Blue)
Wave length: 638nm(Red)/520nm (Green)/450nm(Blue)
Laser Class : CLASS 4
DMX Channel
：
14
Control signal
：
DMX-512 signal
Scanner :25K and 30K at 8°
Operation Mode :Stand-alone, DMX-512 , Sound to Music, ILDA,master and slave
Environment : Indoor use only
3.General safety instructions and warning notices
This laser is a CLASS IV laser product .
This product has to be operated by trained laser operator.
Avoid eye or skin exposure to direct or scattered radiation.
Never look directly into a laser beam or directly into laser aperture when the laser projector is on.
Always stay focused during lasers operating in order to stop the laser projector if anything goes
wrong.
The user/owner is fully responsible for any damages caused by the laser projector, use it in
accordance with applicable laws in your country especially safety regulations laws and any
certification bodies.
4.Installation notice :
Before any use check that the product do not suffer during transport.
While installing the device, do not plug the power supply cord.
Do not use the laser projector outside, indoor use only.
Do not switch on the laser projector as soon as installed, wait for the laser projector to be at the
same temperature of the room to avoid condensation/moisture/mist to damage the product.
2
