ELECTROCOMPANIET ECG 1 Owner'S Manual Download Page 11

11

ENG

Product registration

Please consider registering your product with Electrocompaniet.

Registering will make sure you are informed about important information about your Electrocompaniet 

product, including notifications when a new firmware version is available for your system.

Please go to

 http://members.electrocompaniet.no

 register your product.

If Service is needed

Your dealer will have all relevant information regarding the service centers in your area, and will ensure that 

your unit is serviced with minimum delay. It is our general policy to have your unit returned to you within five 

working days. This is an average time, and can vary locally, depending on the workload at that particular 

service station. If, for some reason, there are no service facilities available in your country, please ship the 

unit to the following address:

Electrocompaniet as,

Breivikveien 7,

N-4120 Tau,

Norway

Web: www.electrocompaniet.no

Service department: www.electrocompaniet.no/support

The end user is responsible for all shipping charges, insurance, re-importation and duty charges. 

When shipping a product to the factory for service, always include the following:

1. A sales slip or other proof of purchase if repair is claimed under warranty.

2. A proforma invoice with value of goods, stating that the ECG 1 is returned to Norway for repair.

3. An accompanying letter describing faults, symptoms, or problems with the unit.

4. Always ship the unit in its original carton and packaging material to prevent damage in transit.

Electrocompaniet will not cover damages incurred in transit. If you require further information concerning the 

operation of the unit, or if you have any questions related to service, please do not hesitate to contact your 

dealer or your national distributor.

User Manual Updates Online

An updated version of the User Manual may be available online at the Electrocompaniet web site. 

Occasional updates are needed to reflect new features added to the player since the User Manual was

printed. As future firmware updates bring in new features and functions, the online version of the User

Manual will be updated accordingly.

Summary of Contents for ECG 1













Reviews: