manualshive.com logo in svg

ELECTROCOMPANIET ECG 1, Owner'S Manual

Share
Download
ELECTROCOMPANIET ECG 1 Owner'S Manual Download Page 10

10

ENG

Technical specifications 

The following technical data were measured on randomized test objects and are typical data.

All measurements are made at 120V / 240V // 50Hz / 60Hz

Turntable ECG 1

Operation:..........................................................................................................Manual

Drive system:..............................................................................Exterior rubber belt drive

Motor:..................................................................................24 V AC synchronous motor

Speeds:.......................................................................................33 1/3 – 45 – 78 RPM

Speed selection:.....................................................................Fully regulated electronically

Platter:................................................................................12” / 2.8 kg (6.1 lbs) acrylic

Tonearm 

Operation:........................................................................................................Manual

Profile:........................................................................................................S – shaped

Headshell:..................................................................................................(SME-mount)

Efficient length:.................................................................................................258 mm

Overhang:....................................................................................................15.17 mm

Offset angle:...........................................................................................................21˚

Tracking error - angle:.............................................................................+ 1.75˚ - 1.25˚

Cartridge weight:.............................................................................................4 - 12 g

Cartridge height:.........................................................................................38 - 60 mm

Moving mass:.............................................................21 g (+ car screws (0,5 g))

Dimensions

Width ......................................................................................465 mm / 18.3 inches

Depth ......................................................................................360 mm / 14.1 inches

Height ............................................................................................153mm / 6 inches

Weight (Turntable with tonearm)..........................................................13 kg. / 28.6 lbs

          Motor......................................................................................1,3 kg / 2.2 lbs

*The manufacturer reserves the right to alter these specifications without further notice.

Summary of Contents for ECG 1













Reviews:

No comments

Brands by name

Popular brands

Load more brands