Electro-Voice TG5, Owner'S Manual

Page: 29 / 148

TOUR GRADE SERIES
Owner’s Manual 29
MODULE CONFIG/CAN-Baudrate: The currently set CAN baud
rate of the RCM-26 is indicated. Pressing the ENTER button
opens the
Set CAN-Baudrate
dialog box, which by pressing the
Up/Down buttons, lets the user select one of the following CAN
baud rates:
10kBaud
,
20kBaud
,
62.5kBaud
,
125kBaud
,
250kBaud
or
500kBaud
.
Pressing the ENTER button stores the selected baud rate in
memory and the display returns to the MODULE CONFIG menu.
MODULE CONFIG/Audio-Input: The currently used audio input
is indicated. Pressing the ENTER button opens the
Select Audio-Input
dialog box, which, by pressing the Up/
Down buttons, allows selecting
Analog
or
AES/EBU
inputs.
Pressing the ENTER button stores the desired input in memory
and the display returns to the MODULE CONFIG menu.
MODULE CONFIG/Power: The power amp’s actual operating
status after using the mains switch is displayed.
If standby mode has been activated via IRIS-Net™ and the power
amplifier has been switched off using the mains switch, the power
amp automatically restarts into standby mode the next time it is
switched on by pressing the mains switch. This menu item allows
booting the power amplifier out of standby mode, even without
IRIS-Net™.
Pressing the ENTER button opens the
Set Power
dialog box,
which allows the selection of
On
or
Standby
operating states by
pressing the Up/Down buttons. Pressing the ENTER button stores
the desired status in memory and the MODULE CONFIG menu
reappears on the display.
CAUTION:
All devices on a specific CAN-BUS must be set to the same baud rate.