12000 Portland Avenue South, Burnsville, MN 55337
Phone: 952/884-4051, Fax: 952/884-0043
www.electrovoice.com
© Bosch Communications Systems
05/2010
Part Number LIT000165000 Rev D
U.S.A. and Canada only. For customer orders, contact Customer Service at:
800/392-3497 Fax: 800/955-6831
Europe, Africa, and Middle East only. For customer orders, contact Customer Service at:
+ 49 9421-706 0 Fax: + 49 9421-706 265
Other Internatonal locations. For customer orders, Contact Customer Service at:
+ 1 952 884-4051 Fax: + 1 952 887-9212
For warranty repair or service information, contact the Service Repair department at:
800/685-2606
For technical assistance, contact Technical Support at:
866/78AUDIO
Specifications subject to change without notice.
Electro-Voice
®
Interfacing RE97L:
RE97LTx Part Numbers
F01U149502
RE97LTx Lapel Microphone, Beige Finish
•
F01U149504
RE97LTx Lapel Microphone, Black Finish
•
Your RE97LTx is configured for use with standard Electro-Voice and Telex bodypack transmitters. Modifications to
your RE97L should be performed by a qualified technician only. Using the microphone in a way other than de-
scribed in this manual may damage the microphone and void your warranty.
The following table is provided for your reference should you desire to utilize the RE97L with another manufac-
turer’s wireless transmitter bodypack. Always verify the specifications of your transmitter before attempting any
changes to your microphone.
Manufacturer
Wireless Systems
Connector Type
Suggested Wiring
AKG
WMS 40 Pro, WMS 400, and WMS4000
(Transmitters PT 40, PT400, and PT4000)
TA3F
Pin 1: Shield
Pin 2: Wire
Jump Pin 2 to Pin 3
Audio-Technica
AT UniPak-type Transmitters ATW-1127, ATW-1235, ATW-1451,
ATW-2110, ATW-3110a, AEW-T1000, ATW-201, ATW-601,
ESW-T210, and ESW-T211 for the following systems: 1100,
1200, 1400, 2000, 3000, 4000, and 5000 Series Professional;
200 and 600 Series Freeway; NOT for use with U100 System
Hirose 4-Pin
HR10A-7P-4S
Pin 1: Shield
Jump Pin 1 to Pin 2
Pin 3: Wire
Shunt Pins 3-4 with R = 5k Ohms
Electro-Voice
RE-2 (BPU-2); RE-1 (CSB-1000); R100 (BPV)
TA4F
Pin 1: Shield
Pin 2: Wire
Shunt Pins 2-3 with R = 10k Ohms
Pin 4: Not Connected
Sennheiser
Evolution Wireless Systems 100, 300, 500
(Transmitters SK100, SK300, SK500), and G2 Series
3.5mm (1/8”)
Stereo or Mono
Mini-Plug
Tip: Wire
Sleeve: Shield
Ring: Not Connected
5V Zener diode: + to tip, - to sleeve
(1N5231 or similar)
Shure
Performance Gear (UT1); PGX1; SLX1; T Series (T1, T11);
UC1; UHF (U1); UHF-R (UR1); ULX Professional and
ULX Standard (ULX1)
TA4F
Pin 1: Shield
Shunt Pins 2-3 with R = 10k Ohms
Pin 3: Wire
Pin 4: Not Connected
Telex
FMR Series 70, 500, 1000 (Transmitters WT-55, WT-500,
WT-1000); SAFE 1000 (SAFE WT)
TA4F
Pin 1: Shield
Pin 2: Wire
Shunt Pins 2-3 with R = 10k Ohms
Pin 4: Not Connected
