Transducer: Condenser, Back-Electret
Freq. Response: 50 Hz - 15 kHz
Polar Pattern: Omnidirectional
Sensitivity, 1 kHz: -48 dBV, 4.0 mV/Pascal
Maximum SPL: >120 dB SPL
Equivalent Noise: 32 dBA
Dynamic Range: 88 dB
Output Impedance, 1 kHz: 3000 Ohms
Power Requirements: +5 VDC
Current Consumption: 310 μA
Polarity: Positive Pressure on Diaphragm
Produces a Positive Voltage on Pin 2
Dimensions: See Diagram
Cable: 4 ft (1.22 m) Long
0.052 in (1.30 mm) Diameter
TA4F Connector Wiring: Pin 1 - Ground
Pin 2 - Audio
Pin 3 - Bias Voltage
Pin 4 - Unused
Accessories Furnished: Long and Short Windscreens
Dual Clothing Clip
Gig Bag
Colors Available: Black, Beige
Net Microphone Weight: 10.5 g (0.4 oz)
Clip Only - 2.1 g (0.08 oz)
Optional Accessories: TXA Phantom Power Adapter
RE97LTx
Ultra-Miniature Condenser
Lapel Microphone
TA4F Connector
General Description:
Technical Specifications:
Key Features:
Ultra-Miniature Size for Inconspicuous Use
•
Omnidirectional Polar Pattern to Provide Clean
•
Sound and Uniform Response
Lightweight, Low Profile, Rugged Construction
•
Superior Sound Quality
•
Terminated with Female TA4F Connector for
•
use with any EV Wireless Bodypack Transmitter
Available in Black or Beige Finish
•
The Electro-Voice® RE97LTx is an ultra-miniature,
omnidirectional, condenser microphone designed for
applications that demand a high quality microphone
element that is practically invisible when worn by
the speaker or performer. The RE97LTx is intended
for spoken-word use in theatrical performance, fixed
installations, corporate AV presentations, houses of
worship, or any venue where a full-range, natural, and
well-balanced sound is required from an inconspicu-
ous, lightweight microphone.
The output of the RE97LTx is clean and accurate, while
the omni-directional polar pattern ensures uniform
output regardless of the microphone’s angle relative
to the sound source. The provided clip is a convenient
anchor for the microphone on a lapel, tie, or shirt col-
lar.
The supplied windscreens can be utilized in windy
environments and to reduce breath noise. The RE97LTx
has a shielded 4ft cable terminated in a genuine
Switchcraft® TA4F connector and is ready for use
with standard EV and Telex body-pack transmitters
including the EV REV-BP, BPU-2/CSB-1000 and Telex
WT-500/WT-1000. The wire to the body-pack is ultra-
flexible, and may be easily concealed.
