background image

12000 Portland Avenue South, Burnsville, MN  55337
Phone: 952/884-4051, Fax: 952/884-0043

www.electrovoice.com

© Bosch Communications Systems 

08/2008

Part Number LIT000248 Rev C

U.S.A. and Canada only.  For customer orders, contact Customer Service at:

800/392-3497  Fax: 800/955-6831

Europe, Africa, and Middle East only.  For customer orders, contact Customer Service at:

+ 49 9421-706 0  Fax: + 49 9421-706 265

Other Internatonal locations.  For customer orders, Contact Customer Service at:

+ 1 952 884-4051  Fax: + 1 952 887-9212

For warranty repair or service information, contact the Service Repair department at:

800/685-2606

For technical assistance, contact Technical Support at: 

866/78AUDIO

Specifications subject to change without notice.

Electro-Voice

®

Dimension Drawing:

Frequency Response:

Polar Response:

Microphone Use and Placement

Please note that micing techniques are a matter of personal
preference. These are merely guidelines to assist in the
placement of the microphone to gain optimal performance.

Usage   

 

Optimal Placement

Overheads

 

 

Use two microphones in a 3:1 spacing position facing slightly away from each other.

High-Hat 

 

Place microphone 3 to 6 inches from and at a 45° angle to cymbal edges.

Acoustic Guitar

   

Place microphone 6 to 24 inches from and pointed towards body end of finger board.

Strings

   

 

For small string instruments, place microphone 1 to 3 feet from and perpendicular to the soundboard,   

 

 

 

pointing at the strings and f holes.  Use similar microphone positioning for larger string instruments, but

 

 

 

6 to 8 feet away.

Standard Placement & Use Guidelines

1. Always point the microphone at the desired source of sound, and away from any unwanted sources.
2. The microphone should be located close to the sound source to minimize interference from other potential sound sources.
3. Use the 3-to-1 rule when using multiple microphones. Place each microphone three times farther from other microphones as from  
the desired sound source.
4. Minimize over-handling of the microphone to reduce unwanted mechanical noise.

PL37 Part Numbers

PRD000165000  PL37, Cardioid Condenser Overhead  

• 

 

Microphone

ACC000047000  SAPL-3, Replacement Microphone Stand  

• 

 

Adapter

ACC000051001  WSPL-4, Optional Foam Windscreen   

• 

 

Adapter, Black

Reviews: