INSTALLATION NOTE: CONNECTOR WIRING GUIDELINES
Two possible layouts for wiring a group of speakers are described below.
1. Wiring in parallel. Connect the wire pair of the subsequent speaker
to pins 2 and 3. When one input connector is removed, subsequent
speakers will remain connected. See Figure 6.
2. Daisy-chaining. Connect the wire pair of the subsequent speaker
to pins 1 and 4.When one input connector is removed, subsequent
speakers will also be disconnected. See Figure 7.
Installation and Wiring
Figure 6:
Parallel Wiring
Figure 7:
Daisy-Chain Wiring
EVID™ FM Series Installation and Operation Manual
7
From amplifier or
previous speaker
To next speaker From amplifier or
previous speaker
To next speaker
When all wiring has been completed to the connector, plug the connector
into the socket in the speaker’s terminal cup. See Figure 8. Tighten all
screws to eliminate vibration.
Figure 8:
Plug Connector Into Socket
Input Connector
Terminal Block
