Installation and Wiring
EVID™ FM Series Installation and Operation Manual
9
Step 5: Attach the Grille
INSTALLATION NOTE: GRILLE SAFETY FEATURE
EVID grilles features a unique safety tether to prevent the grille from fall-
ing if the grille is removed or comes loose after installation. First, install
the grille’s safety tether by pushing the grille fastener into the hole in the
front of the baffle (see Figure 12). Second, press the grille into place until
the front of the grille is flush with the rim of the baffle. Make sure the grille
is securely seated to prevent it from vibrating loose. If you need to re-
move the grille, the easiest way is to insert two bent paper clips or other
pointed objects into holes in the grille, then apply slow even pressure to
pull down on the grille until that section of the grille comes out slightly.
Continue the same procedure around the perimeter of the grille, loosen-
ing a portion at a time until the grille is removed.
EVID™ FM4.2
In addition to the 8-ohm setting,the power taps are 30 W, 15 W, 7.5 W,
and 3.75 W at both 70.7V and 100V, with a 1.75 W tap for 70.7V only.
EVID™ FM6.2
In addition to the 8-ohm setting, the power taps are 60 W, 30 W, and 15
W at both 70.7V and 100V, with a 7.5 W tap for 70.7V only.
Figure 12:
Attach the Grille
Safety Tether
Grille
