background image

3.2  ACV 

Range 

Accuracy 

200mV 

1.2% ±3 

2V 

0.8% ± 2 

20V 

200V 

750V 

1.2% ±3 

Input impedance: 10MΩ Frequency range: 40 ~ 400Hz 

3.3  DCA 

Range 

Accuracy 

2mA 

1% ± 3 

20mA 

200mA 

1.8% ±3 

20A 

2% ±5 

Measuring voltage drop: 200mV 

3.4  ACA 

Range 

Accuracy 

2mA 

0.8% ± 1 

20mA 

200mA 

1.2% ±1 

20A 

2% ±5 

Measuring voltage drop: 200mV Frequency range 40 ~ 400Hz 

3.5  CAPACITANCE 

Range 

Accuracy 

2nF 

2.5% ±3 

20nF 

200nF 

2uF 

20uF 

3.6  OHM 

Range 

Accuracy 

200

Ω 

0.8% ± 3 

2K Ω 

0.8% ± 1 

20K Ω 

200K Ω 

2M Ω 

20M 

Ω 

1% ±2 

200M 

Ω 

5% ±1 

Summary of Contents for DT9205A

Page 1: ...d when the battery voltage drops below the operating voltage Full range over load protection Capacitance measurement Auto zeroing Auto Power Off Automatic cut off approx 15 minutes after the power on It needs to be switched off and on again to continue operation Operating temperature 0 C 40 C 0 75 R H Storage temperature 10 C 50 C 0 75 R H Power Single standard 9V battery Dimensions 191mm L x 89mm...

Page 2: ...ccuracy 2mA 1 3 20mA 200mA 1 8 3 20A 2 5 Measuring voltage drop 200mV 3 4 ACA Range Accuracy 2mA 0 8 1 20mA 200mA 1 2 1 20A 2 5 Measuring voltage drop 200mV Frequency range 40 400Hz 3 5 CAPACITANCE Range Accuracy 2nF 2 5 3 20nF 200nF 2uF 20uF 3 6 OHM Range Accuracy 200Ω 0 8 3 2K Ω 0 8 1 20K Ω 200K Ω 2M Ω 20M Ω 1 2 200M Ω 5 1 ...

Page 3: ... Do not use or store the instrument in conditions of high temperature and high humidity 5 METHOD OF MEASUREMENT 5 1 DCV ACV MEASUREMENT 1 Set the Function range switch at the required position 2 Connect black test lead to COM terminal and red test lead to the V OHM input terminal 3 Connect test leads to measuring point and read the display value The polarity of the red lead connection will be indi...

Page 4: ... Never apply voltage to the Cx input socket or serious damage may result 5 5 DIODE CONTINUITY TEST 1 Set the function range switch to the position 2 Connect the black test lead to COM terminal and red test lead to V OHM input terminal Note the polarity of the red test lead is 3 This range has an AUDIBLE CONTINUITY TEST function Built in buzzer sounds if the resistance between the two probes is les...

Reviews: