2665-4 Page
6
POWER CORD
SERIAL DATA INPUT JACK
SERIAL DATA OUTPUT JACK
GOAL LIGHT RECEPTACLE
Figure 2 Electrical Connection Points
Connecting The Scoreboard To Your Power Source
Each scoreboard cabinet requires 120 VAC 1 amp service. Each scoreboard cabinet has a
6 foot attached power cord which can be plugged into a NEMA 5-15R receptacle.
ScoreLink 200
The SCORELINK 200 RF MODEM SET is intended to eliminate the control cable
between the scoreboard and the control console on Electro-Mech Scoreboard MM and
MP series scoreboards as well as all LED scoreboards. If you have purchased this
accessory, disregard the section of this manual titled
Control Cable Installation
. Refer
to the SCORELINK 200 RF MODEM SET OWNER’S HANDBOOK for installation
instructions.
Electro-Mech Scoreboard Co.
•
120 Industrial Parkway
•
Wrightsville, GA 31096
Phone: (800) 445-7846
•
Fax (478) 864-0212
•
Email: [email protected]
