2665-4 Page
22
LED Power Supply Module Replacement
Electrical connections to the LED POWER SUPPLY MODULE LPS-130VA are made
with three keyed plugs that mate with jacks on the left side of the module. The module is
secured inside the scoreboard with two machine screws.
1.
Disconnect the plugs from the three jacks on the module.
2.
Remove the two machine screws.
3.
Remove the module from the scoreboard.
4.
Insert the replacement module in the scoreboard.
5.
Secure the module with the four screws.
6.
Insert the plugs into the jacks on the side of the module.
To avoid damage to the module,
always turn off the power to the scoreboard when
removing or replacing it
.
Electro-Mech Scoreboard Co.
•
120 Industrial Parkway
•
Wrightsville, GA 31096
Phone: (800) 445-7846
•
Fax (478) 864-0212
•
Email: [email protected]
