4U2SEE
™
Enhanced Version Advanced Display Protocol (ADP) • Version 4.0
Copyright © 2006 Electro-Matic Products, Inc. All rights reserved.
36
APPENDIX A • UPDATING AN ENHANCED 4U2SEE
Appendix A: Updating An Enhanced 4U2SEE With
Firmware 8E04
CAUTION:
The following procedure should only be performed by properly trained technicians.
This procedure can only be utilized on enhanced display boards, utilizing Sigma 3000 Version 2.14
software, which can be purchased through Electro-matic Products Inc. Warranty will be voided if not
performed by trained technicians.
Checking the version of Sigma 3000:
There is multiple avenues to open ‘Sigma Editor’ and check on the version.
A) Open ‘Sigma Play’ > select ‘Tool’ > select ‘Edit File’ (as shown below)
B) Open ‘Start’ < select ‘Sigma 3000 (2.14)’ <select ‘Sigma Editor’ (as shown below)
C) Open ‘Sigma Play’ > select ‘Edit’ icon (as shown below).
D) Once ‘Sigma Editor’ is open the version number will appear in the header (title – dark blue) or in
the ‘Help’ pull-down; select ‘Help’ < select ‘About’ (as shown below).
