4U2SEE
™
Enhanced Version Advanced Display Protocol (ADP) • Version 4.0
Copyright © 2006 Electro-Matic Products, Inc. All rights reserved.
28
6.4.11 • PLAY LIST OR RUN SEQUENCE
6.4.10 Character Hold (Stay) Command Code <0x0E>
This command determines the available pause rate of the display. This rate of pause is directly
proportional to the In/Out modes. This command is based on seconds, from 00 – 99 (must be a two
(2) digit code). For simplicity not all code possibilities are shown.
00 seconds
<0x01>Z00<0x02>AA
<0x0E>00
This is where you type your message <0x04>
01 seconds
<0x01>Z00<0x02>AA
<0x0E>01
This is where you type your message <0x04>
.
.
05 seconds
<0x01>Z00<0x02>AA
<0x0E>05
This is where you type your message <0x04>
.
.
10 seconds
<0x01>Z00<0x02>AA
<0x0E>10
This is where you type your message <0x04>
.
.
99 seconds
<0x01>Z00<0x02>AA
<0x0E>99
This is where you type your message <0x04>
PLEASE NOTE:
1) In the above examples no carriage return spaces need to be between the Hold Time
and the beginning of your message or between the end of your message and the “End of Tran
mission” (“H” in Table 2 ). Also all bold text in the above ASCII code examples are supplied to aid
each circumstance and all non-bolded format text is explained in Table 2.
2) This command is not applicable to 4U2SEE firmware versions prior to version 8E04.
3) For examples of expanded files character hold (stay) command code reference Appendix D:
Examples of FlexSender Code.
6.4.11 Play List or Run Sequence
Existing or creating messages you would like to appear on the display, can be apart of a play list or
run sequence.
To construct a play list or a run sequence the following ASCII TEXT (Simple or Expanded) File format
must be followed:
<0x01>Z00<0x02>
E.SLXY
<0x04>
To further explain setting up the play list (run sequence) the ‘Command Code’ has been bolded. See
below for an explanation:
The ‘E’ is a special function command
The ‘.’ (period) is the set play list command
The ‘SL’ is an extension of setting the list of messages
The ‘XY’ is a designation for the list of TEXT (Simple or Expanded) Files you would like to appear in
your play list (sequence).
To construct a play list (run sequence) in ASCII TEXT (Simple or Expanded) Files the following steps
must be adhered to:
1) Apply (existing) or write a series of TEXT (Simple or Expanded) Files to the display, making resident
in memory:
<0x01>Z00<0x02>AA Sample A <0x04>
(Simple TEXT File)
<0x01>Z00<0x02>Aq Sample B <0x04>
(Simple TEXT File)
<0x01>Z00<0x02>A<0x0F>DTxf Sample C <0x04>
(Expanded TEXT File)
<0x01>Z00<0x02>A<0x0F>DTCb Sample E <0x04>
(Expanded TEXT File)
<0x01>Z00<0x02>Ag Sample F1 <0x04>
(Simple TEXT File)
<0x01>Z00<0x02>A<0x0F>ETAS Sample F <0x04>
(Expanded TEXT File)
<0x01>Z00<0x02>Aa Sample G <0x04>
(Simple TEXT File)
<0x01>Z00<0x02>A6 Sample H <0x04>
(Simple TEXT File)
Based on the explanation above, create a play list (sequence) for TEXT Files:
<0x01>Z00<0x02>
E.SL
A6<0x0F>ETAS<0x0F>DTCb<0x04>
The display will read and display four (4) files - separately:
