Fiber
Jacks
3. Connection
Connect the FiberCom Media Converter as follows:
a.
Connect the network device (work station, hub or switch) with RJ45
interface to the FiberCom’s RJ45 jack, using Cat-5 twisted-pair.
b.
Connect the fiber optic cable to the FiberCom’s ST Fiber jack.
c.
Plug the supplied Power supply into the FiberCom.
d.
Once the devices are powered on, the FiberCom LEDs
indicate connection status. See next section.
4. Front Panel Indicators
Number LED
Function
Status
Meaning
ON Power is ON
1 PWR
Power
LED
OFF Power is OFF
ON Fiber link is ACTIVE
2
FP
Fiber port link/action status
LED
OFF Fiber link is INACTIVE
ON Data is being received
Blink Data has been transmitted (not currently transmitting)
3
Link/Act
UTP port link/action status
LED
OFF Data is not being sent out
ON 100M
speed
4
100M
UTP port speed LED
OFF 10M speed
ON Full-duplex
Blink Data collision (Half-duplex mode, only)
5 FDX/COL
Duplex
Mode
OFF Half-duplex
RJ45
Jack
Power Supply
Input Jack