iv
ELECTRO FREEZE Soft Serve Model SL500
Safety Decal Locations
You may contact your local authorized
Electro Freeze Distributor, as follows:
NAME:_______________________
ADDRESS:____________________
______________________________
PHONE:_______________________
or — for factory service assistance —
contact H. C. Duke & Son, LLC, Electro
Freeze Service Department by phone or
FAX:
Phone:
(309) 755-4553
(800) 755-4545
FAX: (309) 755-9858
E-mail: [email protected]
(The decals on the next page are num-
bered 1, 2 and 3. Those numbers corre-
spond to the numbers in the table below.
The table provides the part number,
description, and quantity for each decal.)
Do not attempt to operate the freezer until
all safety precautions and operating
instructions in this manual are read and
understood.
Take notice of all warning, caution,
instruction and information decals (or
labels) on the freezer as shown in the
figure on the following page. The labels
have been put there to help maintain a
safe working environment.
The labels have been designed to with-
stand washing and cleaning. All labels
must remain legible for the life of the
freezer. Check labels periodically to be
sure they can be recognized as warning
labels.
If it is necessary to replace
any
label,
please contact your local authorized
Electro Freeze Distributor or H. C. Duke &
Son, LLC When ready to order you will
need to determine the (1) part number, (2)
type of label, (3) location of label, and (4)
quantity required, and include a return
shipping address.
No.
Part No.
Description (Qty)
1
HC165025-02
Decal — Beater Warning Black(1)
2
HC165025-01
Decal — Beater Warning Twist (1)
3
HC165126
Decal — Panel Removal Warning (3)
