ELECTRO FREEZE CS700, Operator'S Manual

Page: 24 / 65

123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
ELECTRO FREEZE Shake Model CS700
184602
16
6.3 Cleaning Instructions
— continued
Figure 6-7 Clean shaft seal and plunger
Figure 6-8 Clean scraper blades
Figure 6-9 Clean hopper and mix feed port
Replace worn brushes. Use
only Electro Freeze original
or authorized replacement
parts. See Accessories
Parts List in Part II of this
manual to order new
brushes.
c. The shaft cup seal, washer, and
plunger O-ring grooves (figure 6-7).
d. The beater shaft and the scraper
blade pin holes, shown in figure 6-8.
3. After all parts are washed, rinse and
place them in the sanitizing solution. For
proper sanitizing, all parts must remain
fully immersed in the sanitizer for 5 min-
utes.
Allow parts to air-dry after sanitizing.
Important:
Do not leave parts in sanitizer for more than
15 minutes.
4. Wash hopper walls and all soiled
surfaces on the freezer with a clean disposable
towel. Using proper brush, brush the hopper
inlet tube (figure 6-9), the cylinder and cylinder
back wall (figure 6-10) thoroughly. Rinse using
rinse bottle. Using sanitizing solution, repeat
brushing and rinsing procedure making sure all
surfaces contact sanitizer.
5. Brush the inside of the drain tube with
sanitizing solution and rinse, as shown in figure
6-10.
Figure 6-10 Clean drain tube and cylinder
Drain Tube
Cylinder
3 Piece Shaft Seal 1 Piece Shaft Seal