![ELECTRO FREEZE CS4 Operator'S Manual Download Page 21](http://html.mh-extra.com/html/electro-freeze/cs4/cs4_operators-manual_2379674021.webp)
ELECTRO FREEZE Model CS4
184964-13
13
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
8 Assembly
Correct assembly of the freezer is
essential to prevent leakage of product
and damage to the freezer. To assemble
the freezer you will need an approved
lubricant (such as Petrol-Gel). Make
sure all parts of the assemblies have
been washed and sanitized before
assembling. Persons assembling the
freezer must first wash and sanitize their
hands and forearms with an approved
sanitizer.
CAUTION
To avoid electrical shock or
contact with moving parts,
make sure all switches are in
the “OFF” position and that
the main power supply is
disconnected.
1. Assemble the beater shaft seals
on the washer to complete the beater
shaft seal assembly. Apply a moderate
amount of approved sanitary lubricant
(such as Petrol-Gel or equivalent) to the
internal surface of the plastic washer. Do
not allow any lubricant to come in
contact with the bell-shaped rubber
portion of the seals (figure 8-1).
2. Install the shaft seal assembly
over the rear of the beater shaft (figure
8-2). Wipe any excess lubricant from the
beater shaft.
3. Apply lubricant to the bearing
areas of the breaker bar and bushing.
4. Slide the breaker bar into the
center of the beater shaft so the bar fits
into the hole in the rear beater shaft
disc. Place the scraper blades on the
beater shaft, as shown in figure 8-2,
5. Insert the assembled beater into
the cylinder by sliding the rear blade
along the bottom of the cylinder. This will
center the beater shaft and allow align-
ment with the drive shaft. Rotate and
push the beater assembly until the
shank has engaged the drive shaft.
Figure 8-2
Assemble beater shaft
assembly
Figure 8-1
Lubricate shaft seal
–continued
WASHER
LUBRICATE WASHER
DO NOT
LUBRICATE
SHAFT SEAL
DO NOT
LUBRICATE
SHAFT SEAL
SEAL-BEATER SHAFT
Summary of Contents for CS4
Page 49: ...ELECTRO FREEZE Model CS4 11 ...