11
EN
Product usage
B
Before first use
• Clean the unit ( Cleaning and maintenance).
Use
Place the motor base on a flat surface.
Fit the juice container on top of the motor base.
Position the pulp filter on the drive shaft.
Then place the cone onto the assembly. (Assemble in the indicated order).
Plug the unit’s plug into the mains socket.
Preparing fruit
• Wash the fruit, then cut it in half and place it on the cone.
Use one hand to lightly squeeze half of the fruit over the cone. Use the other to hold
the motor base in place. The motor will start. The extracted juice will flow into the juice
container by means of the pulp filter which retains any bigger chunks. When all the juice
has been extracted, stop pressing down on the cone and the motor will stop. The unit
will then enter standby mode. To restart the unit, apply pressure to the cone. The motor
may rotate in a different direction.
To remove the juice, lift off the cone and pour out the liquid.
After use:
When you have finished using the unit or whenever the unit is not in use, disconnect the plug
from the power supply.
Summary of Contents for 965263
Page 2: ......
Page 3: ...1 2 3 4 5 6 1 2 ...
