
7
1.
While power is still disconnected place the juice
collector on the top of the motor base. Make sure the 3
holes at the bottom of the collector are aligned than
rotate in a clockwise direction until it locks into position
2.
Install the smart mixer by
clicking it on the juice outlet
3.
Select your favourite juicing
screen and insert it in the cleaning
blade
4.
Place the assembled parts into the
juicer collector
5.
Note that the triangle mark on the
juicing blade (strainer) needs to align
with the triangle mark on the juice
collector. Ensure that the strainer is
completely pushed down.
6.
Place the Auger into the strainer.
Ensure that the Auger is in position by
pressing down on it, and feeling the auger
clicks into place.
7.
Place the assembled feeder/ body
cover onto the juice collector. Align the
mark on the cover with the mark on the
juice collector bowl and turn it clockwise
to the locked status. It should click into
position as in the pictures bellow.