Page
9
of
12
MAINTENANCE
CLEANING
ATTENTION: Please turn off the appliance and disconnect from the mains before cleaning or
performing any maintenance.
CLEANING THE SURFACE
•
Clean the plastic housing with a duster or a soft wet cloth.
•
Do not use chemical solvents (such as benzene, alcohol or gasoline) as they may cause irreversible
damage.
•
Make sure no water enters the control panel.
CLEANING THE WATER TANK
•
Unplug the appliance then remove the screws securing the filter frames.
•
Unfasten the water tank from the main body using the clasps on either side of the appliance.
•
Lift the filter frames to remove from the unit.
•
With a cloth (dipped in a mild detergent), wipe the water tank, rinse it with water.
•
Cleaning the water tank at least once a week will help reduce any mineral deposits and keep the
filters clean.
•
Care should be taken with the water pump when the water tank is removed to avoid damage.
•
Do not run the unit in cooling mode with stale water in the tank.
•
We recommend emptying the tank and refilling it with fresh water if water has been standing in
the tank for an extended period of time.
Unfasten the water
tank using the two
clasps on the side
Water Tank
Unscrew the screws
holding the frame in
position
Water Pump
Lift up the filter frame
and remove from the
unit.
