Page
7
of
18
INSTALLATION
1. Installation
Warning
：
Before using this unit, please keep it upright for at least 3-4 hours.
This unit can easily be moved from one room to another. While moving the unit
please note that it must always be kept upright and then placed on an even surface.
1.
Place the venting hose on the exhaust air outlet at the back of the
air conditioner.
2.
Push it in then turn anti-clockwise. Make sure is fixed to the unit
and does not come out.
Note: Do not push too hard as this may cause damage. To screw it
into place should take no less than three rotations
3.
Extend one head of the hose and screw it
into the unit anti-clockwise. In the same way
connect the hose to the assembled adaptor (at least three rotations)
4.
Installation of window kit:
Partially open a window and then fix the
window kit to the window as in the image.
This method works with sash
or vertical sliding windows.
The window adapter can be placed
both horizontally or vertically. It can
be also installed using the trough the
wall mounting adapter.
See Venting the air conditioner section
for other venting options.
5.
Please make sure the venting hose is not
kinked or bent. The operation of the unit
will be affected if the air conditioner’s air-
flow is obstructed.
6. Make sure the unit is upright and vertical and there are
no obstructions to the air inlets and outlet grills.
We recommend allowing 50 cm around the unit for
optimal operations and unrestricted airflow.
Do not use in laundry rooms or areas where relative
humidity is higher than 80%.
