8
Attach the Reflector Assembly to the Head Assembly
(C). Secure with cap nuts (GG) and Φ6 washers (DD).
All bolts previously fitted can now be tightened but
Do not over tighten!
Insert the hose & regulator assembly (I/J) through top of
housing (E) and Post (K), tighten gas pipe (I) to head
assembly(C).
Secure head assembly (C) to the post (K) using bolts M5
x 10 (HH), lock washer (JJ), and Φ5 washers (EE).
Note: The control dial on head assembly (C) should
be aligned with door (F).
The pressure regulator and hose assembly to be
used must conform to local standard codes.
DD
GG
HH
EE
JJ
