ElectrIQ eiQTOPVBLACK Installation And User Manual Download Page 3

 

IMPORTANT SAFETY INFORMATION 

Please read this instruction manual carefully and retain for 

future reference. It contains important information concerning 
the safe operation, installation and maintenance of the 
appliance. 

 

  There must be adequate ventilation of the room when the 

hood is used at the same time as appliances burning gas or 
other fuels.  

  This cooker hood is only designed for domestic use, and 

should not be used in a commercial environment. 

  Never use the hood for any purpose other than its intended 

use. 

  Do not check the status of the filters during operation of the 

cooker hood.  

  Do not touch the light bulb within 30 minutes of use.  

  Do not flambé or excessively flame under the hood.  

  Never leave frying food unattended as it can be a serious 

fire hazard.  

  If the supply cord is damaged, it must be replaced by the 

manufacturer, its service agent or a similarly qualified 
person in order to avoid a hazard.  

  The socket outlet for the hood must be located so it is easily 

accessible for the user after installation.  

  Ensure the mains supply voltage corresponds with that of 

the appliance.  

  There is a fire risk if cleaning is not carried out in 

accordance with the instructions.  

  Ensure that the socket used provides adequate earthing of 

the appliance, if unsure professional advise must be sought. 

  This appliance can be used by children aged from 8 years 

and above and persons with reduced physical, sensory or 
mental capabilities or lack of experience and knowledge if 
they have been given supervision or instruction concerning 
use of the appliance in a safe way and understand the 
hazards involved.  

Summary of Contents for eiQTOPVBLACK
















Reviews: