Page
6
of
10
OPERATION
Your heater may be operated by using either the manual controls located on the front of the fan or by
your remote control.
POWER SWITCH ON THE BACK OF THE UNIT
Used to turn the bladeless heater ON and OFF. This should be used to turn off the appliance before
leaving unattended.
CONTROL PANEL AND SETTINGS
ON/OFF BUTTON
Used to turn the bladeless heater ON and OFF.
SWING BUTTON
Press to turn the Swing function on and off. When it is operational the horizontal direction of the airflow
is slowly moved from side to side and the Swing indicator
will be illuminated
MODE BUTTON
Press to cycle through the three available modes: Fan
, Low Heating
and High Heating
TEMP BUTTON
Press repeatedly to increase the desired room temperature. After pressing the temp button the desired
temperature will flash for 3 seconds, before the unit reverts to showing the room temperature. When the
desired temperature has been reached the unit will change into fan mode. The temperature range is
16°C - 40°C
TIMER BUTTON
Press repeatedly to increase the running time in 1 hour intervals. The timer can be set between 1 hour
and 12 hours. The display will show the duration currently set. When the display is showing the timer
duration the
symbol will illuminate next to the timer. To cancel the timer repeatedly press the timer
button until 00 is shown.
COLOUR BUTTON
Press to cycle through the options for the ambient light
– Off, White, Green, Purple or Blue. The light
can be operated independently to the fan.
