6
Heat
1. Press the
MODE
button until the
HEAT
indicator appears
2. Set the desired temperature.
3. Use the
FAN
button to set the fan speed.
Fan mode
1. Press
MODE
button until the
FAN
indicator appears.
2. The temperature settings will not control fan operation
3. Use the
FAN
button to set the fan speed.
Dehumidify
1. Press the
MODE
button until the dehumidify indicator appears.
2. The
FAN
button does not work in dehumidify mode. The fan speed will always be low in this
mode. Also temperature cannot be adjusted in dehumidifying mode
Auto mode
1. Press the MODE button until the AUTO indicator appears. Set temperature under auto mode
to the desired temperature from 16~32 °C
2. The difference between set temperature (Ts) and room temperature (Tr) determines how the
air conditioner operates: cooling, heating or fan.
3. Once temperature is set in auto mode and room temperature measured up and down buttons
will fail to work until the remote is cycling again back in Cooling, Heating or Auto mode.
4. The unit will operate in the auto selected mode until set temperature is reached than switches
the compressor off. Mode is locked until reset via mode button.
5. You can use the FAN button to set the fan speed while in Auto mode.
Timer off function
(while air conditioner is on)
1. Press the
MODE
button until the symbol appears for the operation you want.
2. Set the desired temperature.
3. Use the
FAN
button to set the fan speed.
4. Press the timer off button to set the time. Use the up and down button to choose from 1-24
hours timer setting. Once the time you have set has elapsed, the appliance will switch itself off.
To cancel the timer off function before the set time has elapsed, press the timer off button
again.
Timer on function (while air conditioner is in standby)
1. The appliance is switched off in standby mode
2. Press the
TIMER
button to set the time. Use the up and down button to choose from 1-24
hours timer setting. Set the desired operation, temperature, fan speed, etc. Once the set time
has elapsed, the appliance will switch itself on. To turn off the timer on function before the set
time has elapsed, press the timer on button again.
Sleep mode
1. Press the
SLEEP
button 2.
Set the desired temperature.
3. Press the
SLEEP
button;
SLEEP
indicator will appear on the display. Cancel the sleep mode
by pressing this button again.
4. The fan speed is low in sleep mode.
Turbo
1. Press the MODE button until the fan symbol appears.
2. Set the desired temperature.
3. Use the FAN button to set the fan speed
4. Press the TURBO button. The fan and compressor will run at maximum speed for 15 minutes,
then at previously set speeds.
Summary of Contents for eiQ-12K12KC24KWMINV
Page 13: ...13 ...
Page 20: ...20 Outdoor Unit ...
