![ElectrIQ CD20LE User Manual Download Page 4](http://html1.mh-extra.com/html/electriq/cd20le/cd20le_user-manual_2379395004.webp)
•
Never operate this appliance if the cord or plug is damaged.
Ensure the power cord is not stretched or exposed to sharp
object/edges.
•
A damaged supply cord should be replaced by the manufacturer
or a qualified electrician in order to avoid a hazard.
•
Any service other than regular cleaning or filter replacement
should be performed by an authorized service representative. Failure
to comply could result in a voided warranty.
•
Do not use the appliance for any other purposes than its
intended use.
•
This dehumidifier must always be stored and transported upright,
otherwise irreparable damage may be caused to the compressor; if in
doubt we suggest waiting at least 24 hours before starting the unit.
•
Avoid restarting the dehumidifier unit unless 3 minutes have
passed since being turned off. This prevents damage to the
compressor.
•
Never use the mains plug as a switch to start and turn off the
dehumidifier. Use the provided ON/OFF switch located on the control
panel.
•
Always place the unit on a dry and stable surface.
•
The appliance should not be installed in laundry or wet rooms
where the humidity is higher than 85% RH
•
Do not place the unit next to heat sources (e.g. Electrical fires,
fireplaces, etc.)
Energy Saving and Unit Safety Protection Tips
•
Do not cover or restrict the airflow from the outlet or inlet grills.
•
For maximum performance the minimum distance from a wall or
objects should be 50cm.
•
Keep the filters clean. Under normal conditions, filters should only
need cleaning once every three weeks (approximately).
•
Since the filters remove airborne particles, more frequent
cleaning maybe necessary, depending on the air quality. Vacuum
the Activated Carbon Filters and wash the mesh filters with hot
soapy water and dry them before placing them back in the unit
2