background image

TANK FULL LIGHT

When the water tank is full, removed or incorrectly inserted the unit will stop dehumidifying, 

the red tank full light will illuminate and the unit will beep. Empty the tank and reinsert it 

correctly to resume operation.

AUTO DEFROST

When frost builds up on the evaporator coils, the compressor will cycle off and the unit will 

go in to defrost mode. Following completion of the defrost mode, the unit will return to the 

previously operating settings.

AUTO-RESTART (on some models)

If the unit stops unexpectedly due to the power cut, it will restart with the previous function 

selected automatically when the power resumes, and the 3 minute compressor protection 

has elapsed.

POWER

After the unit has stopped, to protect the compressor it is not recommended to resume 

operation for at least 10 minutes. Operation can resume after this period lapses. When the 

unit is restarted there is a 3 minutes delay before compressor will start.

LIGHTWEIGHT PORTABLE DESIGN ON CASTORS

The dehumidifier is built to be compact and lightweight. The castors on the bottom of the unit 

make it easy to move from room to room.

Your dehumidifier contains an advanced micro-CPU controlled device which is capable of 

self-diagnostics. The LCD display may also show the error and protections codes.

HUMIDISTAT CONTROL AND FAN/COMPRESSOR OPERATION

OTHER FEATURES AND INDICATORS

When the unit is running in a room with a temperature between 5

o

C and 12

o

C, it will enter 

defrost mode roughly every 30 minutes.

When the unit is running in a room with a temperature between 12

o

C  and 20

o

C, it will enter 

the defrost mode roughly every 45 minutes.

When the humidity of the room is 2% lower than the desired humidity the compressor will 

turn off automatically but the fan will continue to operate to ensure that the air within the 

room is not stale. The unit will use only a minimal amount of energy in fan mode.

When the humidity of the room is equal to or higher than the desired humidity the 

compressor will restart after a 3 minutes delay to protect the compressor.

• 

• 

10

09

Summary of Contents for CD12P





















Reviews: