11
NOTES:
When you remove the bucket, do not touch sensors or any parts which are situated
behind tank. Doing so may damage the product. Be sure to push the
tank gently all the way into the unit. Banging the bucket against
anything or failing to push it in securely into place may cause the
unit not to operate.
Do not remove any parts from the water tank or tank enclosure. The
water full sensor will no longer be able to detect the water level
correctly and water may leak from the water tank.
2. Continuous draining
Water can be automatically plumbed in or drained into a sink, a larger recipient or through
the wall into an outside drain by attaching a pipe to the unit (10 mm internal diameter) (not
included). Insert the pipe into the drain outlet at the back of the unit as shown here.
Make sure the connection between pipe and the drain outlet is tight and does not leak. Then
direct the pipe to a suitable drainage point. This unit uses gravity fall to dispose water hence
the drain should be lower than the unit water outlet. Put the tank back. Be sure to run the
water pipe downward and let the water to flow out smoothly. Do not kink or bend the pipe.
NOTE: When the continuous drain feature is not being used, remove the drain hose from
the outlet and place back the rubber bung.
The permanent drain can be used in conjunction with water pump (e.g. when draining a
cellar) to lift the water upwards.
Care and Maintenance
Always shut off the unit and unplug from the mains before cleaning or performing any
maintenance. When it is not in use for long periods it is advisable to remove the plug from
the power socket. Do not use chemical solvents (such as benzene, alcohol or gasoline) as
they may cause irreversible damage to the unit.
