Page
5
of
9
PARTS LIST
Please Note: Both water tanks are part of the main unit, and are not removable.
INSTALLATION
This unit can easily be moved from one room to another. While moving the unit please note that it
must always be kept upright and then placed on an even surface.
Remove all packaging
– while keeping the air cooler in a vertical position.
Make sure that all parts are present and that the unit is assembled correctly - including the
castor wheels (these need to be pushed into place on the base of the unit)
Water tank:
Fill the top water tank with water ensuring that water tank does not to go above the
MAX
level visible on the front of the unit.
When Cooling/humidifying, the water level must not be lower than the
MIN
water line.
If you want to increase the cooling effect, you can put ice or the charged ice packs into either
water tank, but be sure that by adding ice or icepacks the water level does not go over the
MAX
limit. Empty some water if necessary via the drain on the back of the unit.
Make sure that the filter pad is properly inserted into the back of the unit.
Connect the power plug to a working socket, and then press the power button.
Please note: When the unit is plugged in, the appliance will go through a diagnostic process to
ensure it is ready for operation. While this is carried out the lights on the front will flash.
ICE BOX
The ice box can absorb the heat in the water, which in turn can lower the temperature of the water tank.
This can make the air flow cooler.
Remove the ice box and put it in the freezer until it is totally frozen
Put the frozen ice box into the top water tank.
Top Water Tank
LED Display
Air Outlet
Water Level Window
Castors
Handle
Control Panel
Particle Filter
Honeycomb Filter
Lower Water Tank
Drain Plug