IMPORTANT SAFETY INSTRUCTIONS
5
About this document
These operating instructions describe how
to operate the charger properly. For your
personal safety, follow these Operating
Instructions exactly.
The Dock serves as a docking station
that must be installed before the charger can
be mounted. Dock may be plugged into a
NEMA 14-50 outlet or hardwired to the
main power supply.
Hardwiring must be
performed by a qualified electrician. See
the DockInstallation Instructions provided
with the Dock for complete installation
details.
Do not carry out any work that is not
described here. When in doubt, consult a
qualified electrician.
Intended purpose
These operating instructions apply to the
charger and its use in USA and Canada.
Follow all federal, provincial and local laws,
regulations, ordinances, codes and safety
standards.
Charger – intended use
This device is intended for indoor and
outdoor use. The charging instructions are
listed on an adhesive label provided with
the charger and may be affixed to the side
of the charger.
Do not obscure any information on
the charger. All persons using the charger
must first have read and understood
these instructions.
This device is intended exclusively for
the charging of electric vehicles fitted
with a Type-1 plug (SAE J1772-2009), and
charging current control via the pilot signal
(IEC 61851-1). Do not use the charger to
charge or supply other devices.
Please bear in mind:
• Do not use any adapters, converters, or
charging cable extensions.
• The circuit breaker is installed outside of
the charger and Dock and must be easily
accessible.
IMPORTANT SAFETY INSTRUCTIONS
WARNING
When using electric products,
always follow basic precautions,
including the following:
READ ALL THE INSTRUCTIONS BEFORE INSTALLING, OPERATING,
MAINTAINING, OR USING THIS PRODUCT. SAVE THESE INSTRUCTIONS.
THEY MUST BE PROVIDED TO EACH NEW OWNER.
