>>> Please read these instructions before opening the carton <<<
Note: this will have the Battery Charger, Tool Kit and Instruction Manual attached to it.
•
Remove the Battery Charger, Tool Kit and User Manual from the Seat Assembly
Do not remove the Cardboard from the Deck as this will protect the Deck from
damage during assembly of Steering
Using either the Tool Kit provided or your own Tools;
•
Lift steering column into place and secure with fittings provided.
•
Lock Steering Column into place.
•
Fit Handle Bar and secure firmly.
Take your time fitting Handle Bars.
•
Remove the cardboard protecting the deck.
•
Remove the Two Bolts that secure the Cross Brace.
The Scooter should remain upright.
•
Cut the wire near the rear wheel that secures the scooter to the
Lower part of frame
.
•
You should be able to now wheel the scooter
backwards
out of the frame.
Note: this maybe a bit tight due to settling during transport.
