Electric Mobility Rascal Veo, Owner'S Manual, Page: 8 / 36

8
Rascal Veo, Veo X & Veo Sport Scooter
Controls
Before driving your vehicle it is important to familiarise yourself with the controls. Do not attempt to drive the
vehicle before reading the rest of this Handbook.
Dashboard Description
1. Battery Indicator: This indicator shows the level of charge in the batteries. When in the green area the
batteries are fully charged. When in the yellow area the batteries need recharging and when in the red area
the batteries urgently need recharging. Note: When the vehicle is climbing a steep incline or starting off, the
level may drop momentarily; this is normal.
2. Speed Control: This controls the top speed of your scooter. When the knob is turned fully to the left, this
is the slowest speed setting, marked by a tortoise. As the knob is turned to the right the speed will increase to a
maximum, marked by a hare. Set the speed before you move off. Do not adjust the speed control dial when
the vehicle is moving.
3. Power On Indicator / Status LED: This indicator (first LED on the battery indicator) shows the status of
the scooter – either on or off. Note. The controller has a diagnostic mode: If the red LED flashes, this indicates
that the controller has detected an error or fault. If this happens refer to the diagnostic table at the back of
this manual for a solution.
Tip: One of the most common “faults” is that the scooter has been switched on with the free-wheel function
enabled– Just turn the power on/off key to the off position, position the freewheel lever in drive and turn the
ignition key back to the ON position.
4. Horn: Press the button and the horn will sound. Release and the horn will cease.
5. Ignition Key: Dependent on the model of scooter, the ignition key may have to be pushed in before you can turn
the vehicle on or off. Remember to remove the key when not in use . Do not leave the ignition on when not in use,
especially when charging the vehicle.
1
2
3
4
5
6
6