B L U E W I N D O W O P E R A T I O N A N D I N S T A L L A T I O N M A N U A L
4
4. Installation
ALWAYS USE HIGH CAUTION WHEN WORKING ON
AN ELECTRIC VEHICLE. ALWAYS DISABLE THE
CIRCUIT BREAKER WHEN THE ENGINE BAY IS
OPEN (THIS WILL HELP MINIMIZE RISK OF
SHOCK). ALWAYS TAKE NOTE WHERE THE
HIGH VOLTAGE LINES ARE.
he
Blue Window
is designed to make installation easy. All of
the connections on the
Blue Window
are made with
convenient pluggable screw terminals. The temperature sensor,
however, has a single 4 position plug.
The
Blue Window
should be installed as close to the shunt as
possible. The shunt sense wires should be less than 1’ long.
Figure 1
shows an installed computer. Mounting holes for the
Blue Window
are shown in
Appendix A
. After the installation is complete, you
Section
4
T
