Universale Quick User Guide Rev.1.10 ENG Delectrais an Elettrolab Group brand
4
3. Product Specifications
Universale
is a 1 channel current regulator for LED systems with an embedded power supply; the device can output a
maximum Total Power of 180W; maximum constant output current can be up to 4A: it can be set from 0,5 to 4A, selectable by
the display function panel.
The device can be connected to a phase cut dimmer (leading or trailing edge) and, at the same time, it can be set through the
local potentiometer or through a DMX console; control priority is regulated in according to LTP mode (Latest Takes
Precedence).
The multifunctional display allows for easy access to all its settings menus, measurements, system diagnostics as well as
software updates. The embedded bidirectional communication sub system allows to remotely control all system’s features; this
functionality is made possible by using RDM protocol or by using
Remoto
Delectra.
Please take a look at the website
www.delectra.it
for anyother news or updates.
3.1 Products main features
Input Technical Specifications
Protections
Powering Voltage
100-240Vac (+/- 10%)
Fuse (on board)
F – 5A
Frequency
47-63Hz
Over-Temperature
Yes
Power Factor
> 0,85 @ 230Vac
Power Derating feature
Yes
Nominal Input Power (from mains)
210W @ 240Vac 50Hz 25°C
Output Short-circuit
Yes
Output Technical Specifications
Measurements Availability
Maximum Voltage (@ max load)
45Vdc
Internal Temperature
Yes
Maximum Current
4000mA
LED Temperature
Yes
Number of Channels
1 channel
DMX Signal
Yes
Maximum Power
180W
PWM Frequency setting
Yes
Regulation Type/Mode
Current / PWM
Output Current
Yes
PWM Frequency
320Hz to1200Hz (selectable)
Output % Level
Yes
Flicker free
Yes
Life Time
Yes
Interface Technical Specifications
Environmental Operating Ranges
Power Connector
AWG 14 7,5mm pitch, terminal block
Working Temperature
-20…+40°C free air convention
(+50°C with cooling)
Potentiometer Connector
Stereo jack 3,5mm
Relative Umidity
0-90% (
condensation free
)
DMX Signal Connector
XLR5 M/F 5 pins
Conformal Coating
Yes
Lighting Sources Connector
AWG 12 10mm pitch, terminal block
Auxiliary Output Connector
USB Type-A
Safety& EMC
Fan Connector
AWG 14 7,5mm pitch, terminal block
The device is compliant with the following CE regulations:
NTC Connector
AWG 14 7,5mm pitch, terminal block
Electro Magnetic compatibility (EMC) Regulations
2014-30-EU
Display
4 Digit / 7 segments
Low Voltage Directive (LVD) Electric Material Regulations
2014-35-EU
DMX512
1 x DMX512-A
ROHS Regulations
2011-65-EU
DMX Channels
1 – 2 (default) – 3
For further details refer to the product Declaration of Conformity
Auxiliary output
5V (for wireless DXM supply)
Phase dimming (leading or trailing edge)
Yes
Structural Characteristics
Potentiometer Input
Yes (47KΩ linear) Dimensions LxHxW (mm)
282x70x125
External NTC
Yes (10KΩ) Weight (Kg)
1,2
RDM
Yes IP rating
IP 20
Remoto
©
system compatibility
Yes Insulation Class
Class1
Firmware Update
Yes (using Remoto
©
)
Fan Output
2 x 12Vdc @ 2W total. Linear control.
Fans are activated when exceeding a
pre-defined thermal threshold
Accessories
Remoto
©
DEREMOTO000000
Accendo
©
Dmx 512 Opto Hub
DEOPTOHUB00000
