Electra EHT 302, Instruction Manual

Page: 33 / 36

Cautions
1.The ceramic hotplate must be installed by qualified personnel or technicians.
We have professionals at your service.Please never conduct the operation by
yourself.
2.The hob will not be installed directly above a dishwasher,fridge,freezer,
washing machine or clothes dryer,as the humidity may damage the hob
electronics.
3.The ceramic hotplate shall be installed such that better heat radiation can be
ensured to enhance its reliability.
4.The wall and induced heating zone above the table surface shall withstand heat.
5.To avoid any damage,the sandwich layer and adhesive must be resistant to
heat.
Connecting the hob to the mains power supply
This hob must be connected to the mains power supply only by a suitably qualified person.
Before connecting the hob to the mains power supply,check that:
1. The domestic wiring system is suitable for the power drawn by the hob.
2. The voltage corresponds to the value given in the rating plate
3. The power supply cable sections can withstand the load specified on the rating plate.
To connect the hob to the mains power supply,do not use adapters,reducers or branching
devices,as they can cause overheating and fire.
The power supply cable must not touch any hot parts and must be positioned so that its
temperature will not exceed 75˚C at any point.
Check with an electrician whether the domestic wiring system is suitable without
alterations.Any alterations must only be made by a qualified electrician.
This appliance is supplied with a 3 core mains cable coloured as follows:
Brown = L or Live
Blue = N or Neutral
Green and Yellow=E or Earth
All installation work must be carried out by a
competent person or qualified electrician.
Before connecting the mains supply ensure that
the mains voltage corresponds to the voltage on
the rating plate inside the cooker hood.
Warning: THIS APPLIANCE MUST BE
ARTHED.
33