Electra EHT 302, Instruction Manual

Page: 27 / 36

Care and maintenance
Care
Damaged power cables should be replaced by a
competent person or qualified electrician.
For domestic use only.
Never place an empty pan on the hob as this will cause
an error message to appear on the control panel.
When a cooking zone has been on for a long time, the
surface remains hot for some time afterwards so do not
touch the ceramic surface.
For sealed foods, please do not heat them before
opening removing the lid so as to avoid any dangers of
explosion due to heating expansion.
If the surface of the hob is cracked, disconnect from
power supply to avoid any possibility of electric shocks.
Do not place rough or uneven pans on the hob, as they
could damage the ceramic surface.
Avoid banging pots and pans down on the hob.
The ceramic surface is tough but not unbreakable.
Do not put detergents or flammable materials beneath
the hob.
Warning
Always switch off the electricity supply before
performing maintenance work. In the event of a fault,
contact customer services.
27