10
This mode enables you to set the start and
stop time of operation. Press Timer button
(8) till the ON sign blinks. By pressing again
the OFF sign blinks. By press again the ON
sign blinks. Time
Operation is restored at 10:30 a.m.
Operation stops at 18:00
III. TIMER ON/OFF
Example:
can be adjusted by using
the up and down buttons (9) and (10)
respectively. Press Set button (13) to activate
the timer.
TIMER OPERATING MODES
I. TIMER ON
Example:
This mode enables you to set a start operating
time .Press the TIMER button (8) till ON sign blinks.
Star time can be adjusted using up and down
buttons (9) and (10) respectively. Press SET button
(13) to activate the timer.
Operation is restored at 10:30 a.m.
II. TIMER OFF
Example:
This mode enables you to set the stop time of
operation. Press the Timer button (8) till the OFF
sign blinks. Time can be adjusted using up and
down buttons (9) and (10) respectively. Press Set
button (13) to activate the timer.
Operation stops at 18:00.
IV. CLEAR
Use this mode to cancel timer operation. Press
CLEAR button (14), timer operation will terminate
and the LCD display will be cleared for each
timer mode.
If timer button (8) is selected and neither
time adjust, SET, or CLEAR buttons are not pressed
within 15 seconds; the timer operation will be
cancelled and the last setup will be displayed
Note:
AUTO
ON
OFF
MODE
TIMER OPERATION
Note:
Press TIMER select button (8) to activate the timed operation mode. Each time
you press TIMER button (8) is pressed, one of the following four type of operation
modes will appear on the LCD display. The operation modes are sequenced in
turn in the direction of arrow. Indicator (B) on the air conditioner will light up
during TIMER operation.
After power failure when the unit is in timer mode indicator (B) will be
blinking and the unit will be automatically turned to stand-by mode and the
timer operation will be cancelled. To resume the timer wait 30 sec. before
reprograming. Follow the instructions above.
