Any postage, insurance or other shipping costs incurred in sending your Electra
product for service under either option above is your responsibility. Electra will not be
responsible for products lost or damaged in shipping.
For products purchased in countries other than the United States please contact
Electra's authorized distributor in the country where the product was purchased. They
can be found on our website at www.electraUSA.com
Warranty Exclusions are listed below:
Retailers and sellers of Electra products are not authorized to modify this
warranty in any way. It is your responsibility to regularly examine the product to
determine the need for normal service or replacement. This warranty does not
cover the following:
Products that have been modified, neglected or poorly maintained, used for
commercial purposes, misused or abused or involved in accidents.
Damage occurring during shipment of the products (such claims must be
presented directly to the shipper).
Damage to products resulting from improper assembly or repair, the use or
installation of parts or accessories not compatible with the original intended use
of the product, or the failure to follow the product warnings and usage
instructions.
Damage or deterioration to the surface finish, aesthetics or appearance of the
product.
The labor required to remove and/or re-fit and re-adjust the item covered by this
warranty.
Normal wear to the product.
Any products for which the consumer does not follow the warranty procedures
For the current version of this warranty please visit our website at www.electraUSA.com
(© 4/4/04 Electra Accessories, Inc.)
8
19
ASSEMBLY INSTRUCTIONS
After unpacking your VOY™ there is minimal assembly to be completed. Assembly consists of
attaching the pedals to the VOY™ and attaching the rearview mirrors.
PEDALS
Locate Pedals (Set of 2) The pedals are labeled
left and right near the threads. They are not
interchangeable. The left pedal goes into the
threaded hole on the left crank arm on the left
side of the VOY (your left side as if seated on the
VOY™). The inside surface of the crank arms are labeled "L" and "R" like the pedals. The Left
pedal has reverse threading meaning it tightens by turning it to the left (counter-clockwise).
The Right pedal has normal threading and tightens by turning it to the right (clockwise). After
threading the pedals into the crank arms as far as possible with your fingers (to avoid cross
threading), tighten them snugly with an adjustable wrench.
REARVIEW MIRRORS
Locate the chrome mirrors included with your VOY™. These
have threaded ends and include a nut. With the Hexagonal
("Allen" or "Hex" wrench) Key provided in your VOY™ toolkit,
remove the screw and nut as shown in the pictures.
Once the nut is removed from the threaded end of each
mirror, insert the threaded end of the mirror as shown on picture at left. Then screw the nut
onto the mirror's threaded end as shown on picture at
right. The mirror needs to be tightened fully for assembly
to be safe. Repeat the process for the other mirror.
Once mirrors are installed,
they should look like the
picture on left. Make sure to
adjust the mirrors before use
so that you can see behind
you as you ride.
You have now successfully assembled your VOY™! If you have
anyquestions about assembly please call Electra Customer Service /
Technical Support Toll-Free at 1-888-467-1234 M-F 9am - 4pm PST.
