Electia Icon LCD, Manual

Page: 53 / 58

53
Pause, etc., will operate the DVD (i.e. Punchthrough Not Set for Play, etc.) You need to set up
Punchthrough for each device you’ve set up in the remote. I.E., you need to set up how you
want the “Volume Up/Down and Mute” “Prog Up/Down” and “Play, Stop, Pause REW, FF,
and Record” keys to operate for each device that you have set up, i.e., for whatever mode
the remote is set to. Note also that if you want some other keys to operate in a different
mode from what they normally operate in, you can “learn” the key(s). E.G. if you want your
AV key to still switch the TV’s input when you’re in cable mode, you can learn your TV’s AV
key under cable mode.
KidSafe
Press the HOME key, then select Setup, then select Advanced,
then KidSafe. The first time you access the KidSafe menu you are
asked if you want to set up a KidSafe Code. If you select Yes, you
see this screen. You enter a 4 digit code that you will easily
remember, but that your Kid(s) won’t guess. After you enter a 4
digit code and press OK you see a screen that lets you pick a new
KidSafe code, i.e., change it. And/or set the group of favourites
that your Kids have access to (the default group is Kids but will be
greyed out if you haven’t set that group up yet). You can press
the Side Key next to Pick Favourites and choose a different
favourites group that you want your Kids to have access to, e.g.,
any other favourites group you’ve set up. After you’ve done this
you now have the option to Turn KidSafe On. If you turn KidSafe
On everything in the remote except access to the KidSafe group
(and Volume/Mute keys) is locked out. No settings can be
changed, and Prog Up/Down, and number keys don’t work. If you
try to access any other favourite group, change a setting, or
access any forbidden menu, you are asked to enter the KidSafe
code. You cannot continue unless you enter the correct KidSafe
code. See the Troubleshooting section if you forget your KidSafe
code - but don’t let your kids read this owner’s manual!
Clearing Settings in the Remote
This lets you clear (erase) various things you’ve set up in the
remote. Press the HOME key, select Setup. Then at the screen
to the right select Clear Settings. Pressing the Side Key next to
Devices lets you clear the settings, i.e. codes, for various
Devices (TV, VCR, etc.). After selecting Devices, you select the
device you want to clear. Only devices that you have set up are
shown. All other devices that have not been set up are greyed
out. Pressing the Side Key next to Favourites lets you select a
group and then clear ALL the favourites you had set up in that
group of favourites. Only groups that you have set up favourites
in are shown. All other groups are greyed out. Pressing the Side
Key next to Learned lets you select a device (TV, VCR, etc.) that
you had previously learned commands under and clear everything that was learned. Only
devices that you have learned commands under are shown. All other devices are greyed out.