7
www.elecro.co.uk
Fill System
Upon completion of the installation of the Thermecro solar array and pool
interface valve, it is necessary to initially fill the array.
To fill the solar array press the / buttons until ‘Fill System’ mode
appears on the display press O.K. this turns the filtration pump and the
electronic valve ‘On’ (see diagram 1 and 2).
When the array is fully purged of air (i.e. no bubbles are being returned to
the pool), press the O.K. button again to select ‘Stop Fill’ this switches the
electronic valve and filtration pump off (see diagram 3).
1
ENGL
IS
H
2
3
