5
www.elecro.co.uk
To select a mode press the / buttons until the desired mode is
displayed then press the OK button to select that mode.
Set Water Temperature
Use the / buttons to select the desired swimming pool tempera-
ture. Then press OK to confirm and save.
NOTE
-
We suggest you set the required temperature on your traditional
heater (electric, gas, heat pump) to 1°C or 2°C below the ‘Set Water Temp’
selected. This will ensure your system will operate as efficiently as possible.
Set Up Modes
The Digital controller displays the solar water temperature and the pool
water temperature. There are four modes for the set-up of your solar
system i.e:
• SET WATER TEMPERATURE
• ON DIFFERENTIAL TEMPERATURE
• OFF DIFFERENTIAL TEMPERATURE
• FILL SYSTEM
ENGL
IS
H
