background image

Connection method

USB2.4GHZ wireless (USB wired when connected via cable)

Supported OS

Windows11, Windows10, Windows 8.1, Windows 7 
* Update for each new version of the OS or the installation of a service
pack might be required.

Communication method

GFSK

Radio frequency

2.4GHz

Radio wave range

When used on magnetic surfaces (metal desks, etc.): approximately 3m 
When used on non-magnetic surfaces (wooden desks, etc.):
approximately 10m 
* These values were obtained in ELECOM's test environment and are not
guaranteed.

Sensor

PixArt P LoD sensor

Resolution

100-26000 DPI (can be set at intervals of 100 DPI)

Maximum tracking speed

650 IPS (approximately 16.5m)/s

Maximum detected acceleration

50G

Polling rate

Maximum 1000 Hz

Switch

Optical magnetic switch V custom Magoptic switch

Dimensions

(W x D x H)

Mouse: Approximately 67 × 124 × 42 mm / 2.6 × 4.9 × 1.7 in.
Receiver unit: Approximately 13 × 24 × 6 mm / 0.5 × 0.9 × 0.2 in.

Cable length

Approximately 1.5m

Continuous operating time:

Approximately 120 hours

Weight

Mouse: approximately 73g 
Receiver unit: approximately 2g

Accessories

USB A male-USB C male cable (1.5m) ×1, USB adapter ×1, 3D PTFE 
additional feet × 1, 3D PTFE replacement feet × 1, cleaning cloth ×1, grip 
sheet ×1

Summary of Contents for EG01A










Reviews: