| 9
ON THE DOG
PUT THE COLLAR
It would be best if you found the
sensitivity level
of
your dog by
experimentation.
After turning off and turning back on the collar your
settings will remain.
IMPORTANT!
The correct placement and settings of the collar are
essential for its effective work.
1. If the icon is blinking, the battery is not charged.
Please charge the device.
2. Put the dog in a comfortable position that allows
you to apply the collar correctly.
3. Install the collar receiver (main body) in the middle
of the strap. Note that the collar receiver moves
along the strap as you pull on it. Put the collar on
your dog - high under the jaw and tighten the strap.
The collar’s receiver must be located precisely in
the middle of the neck, one inch below your dog’s
Adam’s apple.
4. For your dog’s comfort in wearing the collar, please
adjust the strap correctly. Put the collar on the
dog, and leave a couple of inches so that the collar
will fit your dog’s neck as it grows or has thick fur.
Then take it off, cut off the excess and burn the
cut with fire for a couple of seconds. For your pet’s
safety, please do it out of your dog’s reach.
5. If the dog’s hair on the throat is long, it must be
shortened for the collar to work correctly.
