Humidity Cabinet
39-1300, 39-1601
9
9907X0093 Issue 3
APPENDIX A
Digital Data Recorder (Temperature & Humidity)
1
Introduction
The Eurotherm nanodac Digital Data Recorder is a simple to use modern version of an
analogue paper chart recorder. Data can be viewed on screen or downloaded for viewing on
a computer. The digital data recorder has the following features and benefits:
•
3.5” colour TFT screen.
•
50 MB built in non-volatile memory for recording temperature and humidity data.
•
Panel mounted USB socket (for downloading recorded data).
•
Scrollable colour graphs for
temperature
and
humidity
displayed in real time.
•
Data is recorded and stored every few seconds in .csv format
•
Recorded data can be imported into Microsoft
©
Excel
©
via a USB flash drive.
Recording of data (to built-in memory) starts automatically after power on.
The recorder will hold approximately 1 years’ worth of data before data is overwritten.
Recorded data can be downloaded onto a USB flash drive for analysis (as required).
The recorder does not need a USB flash drive inserted to record data. (It only needs one
for
downloading
recorded data)
.
In the event of a power cut, stored data will remain safe in the recorder. Recording will not
happen during a power cut.
2
Operation
2.1
Switching On
After plugging the cabinet in, the data recorder will switch on and show a logo while starting
up. (A fuel gauge below the logo shows the loading progress).
Please wait for the recorder to start up
The recorder has been factory configured to record data automatically, once it has fully started
up. No button pressing required.
The screen (below) will appear once the recorder is operating normally: