Eldom Orbi BLN700, Operating Instruction

Page: 10 / 36

10
•
EN
Do not turn on an empty device.
Use the device observing the allowed operation time.
Exceeding operating time and insufficient breaks may result in irreversible damage of the motor.
If the (E,F) blade gets stuck, immediately turn off the blender, disconnect it from the mains and
eliminate the cause of the problem. Leave the device to cool down for at least 15 minutes.
• Wait for the blade
(E,F) to stop before removing the container (C,D) from the base (E,F).
• Turn the container
(C,D), put on flat surface and unscrew the blade (E,F).
• Pour the content to a glass, connect the handle
(B) or the cap (A).
Tips
• To achieve the best results, add ingredients in the following order: liquids, fresh vegetables and
fruit, yogurt.
• Hard fruit and vegetables cut into small pieces (1.8 to 2.5 cm).
• use the blade (E) only for dry ingredients.
The device must not be used:
• to beat eggs,
• to prepare puree,
• to mix warm liquids (over 70°C),
• to grind fruit with stones or hard skin (the blade may be damaged),
• to grind raw meat,
CLEANING AND MAINTENANCE
Clean the device right after its use. Before cleaning, switch off the device, pull out the plug from the
socket and wait until the knife (E,F) stops.
No abrasive agents, cleaning agents, acetone, alcohol, etc., should be used to clean the unit.
Wash the elements in warm water with addition of dishwash with a brush and rinse under running
water.
Wash the blades (E,F) with special care, as they are sharp. The blades (E,F) must not be fully immersed
in water.
Clean the body (H) of the device with a damp cloth. Do not immerse the body (H) in water and do
not rinse it under running water.
The caps (A) and the containers (B) may be washed in a dishwasher, placed on the top rack. Make
sure that they are placed away from the heating element. The maximum temperature is 50°C.