Eldom 5908277383688, Manual

Page: 9 / 36

EN|9
INSTRUCTION MANUAL
CORDLESS KETTLE CS10
EN
GENERAL DESCRIPTION
1. Spout + net filter
2. Opening lid + lid release button
3. On/off switch
4. Handle
5. Water level ind control lamp
6. Rotating base
TECHNICAL DATA
- power: 1500 W
- mains voltage: 230V ~ 50Hz
- 1.0 litre capacity
OPERATION
Cordless kettle CS10 is for boiling water. It is possible to boil 0.4 – 1.0 litre of water in the
kettle.
The kettle base (6) must be put on a flat and dry surface.
In the base there is some space for an excess cord. It is important for the cord to be led
from
the base (6) through a special groove so that the appliance could be stable.
Before using the kettle for the first time fill it up (2-3 times) with water, boil the water and
then
empty the kettle.
The kettle can be filled with water directly through the spout (1) or after opening the lid
(2).
The kettle must not be filled up when on the base.
The kettle starts working after putting the switch (3).
The kettle working is signalled by the control lamp (3).
The kettle switches off automatically after the water has boiled.
You can stop heating water at any time by putting the switch (3).
1
2
3
4
5
6