eldoLED LINEARdrive, User Manual

Page: 26 / 46

26
4.1.1 General function of menu buttons
Pressing M
• shows the current mode or the next menu item; use the M button to browse menus
and settings without making any changes.
• saves a changed value.
• at the last menu item turns off the display.
Pr or -
• changes a value (which is only saved when M is pressed).
4.2 Main menu items
The very first time the power is connected to the LINEARdrive, the display will show the
LINEARdrive type, e.g. LINEARdrive 720, for a couple of seconds. Next, the display shows
“SET MODE”.
You need to set the mode of operation first, before you can move on to the
other menu items.
If the power is interrupted to a LINEARdrive that has already been configured, the display will
only show the LINEARdrive type when the power comes back on, but will not go to the Set
Mode menu, as the LINEARdrive’s configuration has been saved to memory.
Proceed as follows to configure your LINEARdrive:
1. Set the mode of operation (COLR, SHOW, DMX or DALI) in the mode selection menu.
2. Set the LED group configuration in the LED menu.
3. Configure the operation mode you have chosen in step 1 (COLR, SHOW, DMX or DA-
LI).
Except for the configuration menus SET MODE, LED, COLR/SHOW/DMX/DALI and LED
CODE, a number of other menus give the LINEARdrive some additional features:
• TEST: lets you perform a test run of the connected LEDs
• LOCK: lets you softlock or hardlock the LINEARdrive’s configuration
• RESET: lets you reset the LINEARdrive to the factory default settings
Accidentally changed a value but haven’t confirmed it yet by pressing M? By
not doing anything and waiting for 8 seconds, the display will turn itself off
without changing the value.
If you are in a menu and want to change to another menu, do not press any
buttons for at least 8 seconds so the display turns off, and subsequently
press the button combination for the menu you want to change to.