![Eldes EWD3 User Manual Download Page 12](http://html1.mh-extra.com/html/eldes/ewd3/ewd3_user-manual_2377644012.webp)
12
EN
EWD3 WIRELESS MAGNETIC DOOR CONTACT/SHOCK SENSOR/FLOOD SENSOR-READY
6. BATTERY REPLACEMENT
1. Open EWD3 enclosure.
2. Remove the old battery from the battery slots.
3. Insert the new Primary 3V Lithium 1500mAh CR123A type battery based on the battery slot positive/negative terminals indicated on the PCB of EWD3.
4. Battery replaced.
• We strongly recommend to use quality brand batteries, such as: GP, Ansmann, Energizer.
• Only Primary 3V Lithium 1500mAh CR123A batteries can be used. Install only new, high quality and unexpired battery.
• The battery must be removed or plastic tab inserted between the battery slot and the battery if the device is not in use.
• In order to avoid fire or explosion hazards, the system must be used only with approved battery.
• Special care must be taken when connecting positive and negative battery terminals.
• Dispose old batteries only into special collection sites.
• Do not charge, disassemble, heat or incinerate old batteries.
• The battery status can be monitored in real-time using ELDES configuration software.
• The system sends an SMS text message to the listed user phone number as soon as the battery level runs below 5%.
7. RESTORING DEFAULT PARAMETERS
1. Press and hold the RESET button.
2. Hold the RESET button and watch the LED indicator quickly flash (for
approx. 5 seconds.).
3. Release the RESET button.
4. Parameters restored to default.
8. TECHNICAL SPECIFICATIONS
Compatible with:
• ESIM364 v02.16.00 and up.
• ESIM384 all versions
• PITBULL ALARM v2.05.00 and up.
• PITBULL ALARM PRO all versions.
Battery
3V Lithium 1500mAh CR123A type; CR17345 (IEC) / 5018LC (ANSI/NEDA)
Number of batteries
1
Battery operation time
Up to 5 years*
Wireless band
ISM868 or ISM915**
Wireless communication range
Up to 30m (~98ft) in premises; up to 3000m (~9843ft) in open areas
Range of operating temperatures
-20…+55 °C (-4... +131°F)
Humidity
0-90% RH @ 0... +40°C (0-90% RH @ +32... +104°F) (non-condensing)
EWD3 dimensions
117x22x22mm (4.61x0.87x0.87in)
Magnet dimensions
47x13x10mm (1.85x0.51x0.39in)
Compatible with alarm systems
ELDES wireless
* The operation time may vary under different conditions. ** Depends on region.